Made of approx. 3 mm polyethylene braided rope, hand-knotted, black, knotted, very sturdy plastic double net edging, complete with plastic-coated steel cable. Sides and lower edges with heavy, black plastic edging and two 10 mm thick fiberglass rods for lateral fixation. Long service life and excellent durability. 3-year factory guarantee on the network. Dimensions: 667 x 81 cm.
Heavy mobile tournament system from our own production in Schönaich. The aluminum structure has a profile of 80×80 mm and is completely powder coated in black. A combination of high quality aluminum and wide steel base plates ensures high durability even in outdoor use.
Equipped with a tensioning mechanism (internal), the professional net can be adjusted to the desired height. Two diagnostic supports ensure optimal stability of the system. The center strap is easily attached to the existing suspension eye.
Delivered without net and strap.
The plastic-coated aluminum posts with plate manufactured from our own production are an absolute innovation in the pickleball market. The height of 91 cm above the ground with plate, which is set by the Association, is guaranteed. For this reason, these posts are suitable for competition.
With the diameter of 73 mm and a three-chamber special profile, it is a first-class product. The proven aluminum rack and wheel mechanism ensures optimum net tension. All net holding rods, as well as all screws and hooks are made of VA steel. Special feature of these posts are the steel ground plates, that can be fixed with anchors to a beton surface.
The stationary net posts from Court Royal set a new standard in the trendsport from the USA. A structure of permanent net systems as in tennis or padel usual, is made possible with these. With a Ø of 73 mm and made of black plastic-coated aluminum three-chamber special profile, this pair of posts provides excellent stability. Due to the screwable aluminum gear mechanism, the net can be individually tensioned. For increased durability, the net holding rods and all screws and hooks are made of VA steel. For mounting in the ground, supplied without ground sleeves.
The total length is 125 cm, above ground the posts are 91 cm high (incl. net mounting roller). This allows a net height at the side lines of the net of 36 inches as specified by the IFP (International Federation of Pickleball and the DPB (Deutscher Pickleball Bund). A strap shall be attached in the middle to ensure a net height of 34 inches (86.36 cm).
Cover for ground sleeve Ø 73 mm.
Ground sleeves for 73 Ø mm post.
Our rubber squeegee is the perfect tool to get the tennis court back in shape after an intense match or many practice hours. During a tennis session, small grain particles of the tennis surface are detached, which severely reduce the quality of the grip. These will not bond with the brick dust even after sufficient watering and must be removed. For this reason, our one meter wide rubber squeegee is just the right thing. You pull with the rubber lip over the tennis surface and remove the played out roll grain. In addition, small unevenness can be leveled.
The device is made of weather-resistant aluminum and its middle reinforcement ensures perfect pressure balance and can be operated with a minimum of physical force.
The high-quality screen, proven and tested thousands of times worldwide. Heavy-duty polyethylene fabric, UV-stabilized, lets wind through. Full border with plastic-lined brass eyes every 50 cm, thus very resistant to tearing. Wind Screen Exclusive. The quality of Wind Screen Exclusive weighs 140 g/qm and is extremely wind pearmable and is excellently suited for printing, available in the colours light and dark green, yellow, white, blue, red and black. Standard size 12 x 2 m, but also available in length of 50 m and height of 4 m.
With our clay box in different sizes you create the optimal storage space for your tennis sand. The box is made of a composite of fiberglass plastic and synthetic resin. This combination of both materials makes the box very stable and sturdy.
Each filling box is equipped with a hinged lid, which lowers and closes automatically. The closing parts are made of stainless steel. Characterized by an absolute UV and weather resistant. This will prevent the tennis sand from getting wet in case of rain or snow. Of course, you can also use this box for road salt or other materials.
Made of zinc-coated steel with high-quality bristles. Ideal cleaner for sand and clay courts. 600 x 400 mm.
The clay spreader from our own production is designed to level out unevenness on the tennis court. Filling smaller holes with brick dust is very easy with this device. The clay spreader is made of high-quality aluminum in our factory in Schönaich. The material thickness of 2 mm is strong enough to prevent bending and heavy enough to allow effective pushing.
With a working width of 100 cm, you can work effectively and achieve quick results. The internally flattened outer edges ensure that excess brick dust does not over and is displaced over the sides.
The handle holder has a diameter of approx. 26 mm and is designed for the corresponding wooden handle with a diameter of 28 mm and a tapered end which can be ordered separately as an additional accessory or from the drop-down menu. With a low weight of approx. one kilogram, the clay spreader can be operated easily and without great effort.
An incredible capacity of 100L. puts no limits on your ability to transport work equipment and tennis sand. A total load capacity of 300 kg is possible. This is made possible by a high-class chassis, which is made of solid plastic-coated steel tubes. The designed side tipping bars allow a better emptying of the cart. Two air-filled rubber wheels with dimensions 4.80/4.00 – 8 give the wheelbarrow sufficient stability. A seamlessly pressed, galvanized tray with all-round wide beaded edge ensures easy loading and unloading. Plastic handles provide excellent handling. The wheelbarrow Universal is durable and stands out especially for its quality.