Näitan 109–120 tulemust 222-st Sorditud uusimate järgi
-
Handball goal Court Royal
According to safety standard DIN-EN 749, goal frame 3 x 2 m welded, standard goal depth 1.25 m (optional 1.45 m). Made of especially thick-walled 80 x 80 mm aluminum profile with rounded edges, base pipe for screwing in, very sturdy rear construction, base frame made of 75 x 50 mm square aluminum profile with guide groove, net hoop made of 50 x 3 mm round pipe for free net suspension (the net is not pulled over the hoops).
-
-
Youth soccer goal net Borussia 4 mm white
Very sturdy net made of high-strength, 4 mm polypropylene, 2 colours Size: 5.15 cm wide, 205 cm high; top 80 cm, bottom 150 cm deep.
-
Net holder II
For double-groove and single-groove goals. Made of plastic, UV- and weather resistant. For quick net change.
-
Soccer goal SAFETY free-standing
Tilt-resistant according to DIN-EN 748 safety standards according to FIFA regulations, without any ground anchor. Goal frame made of fully welded 120 mm x 100 mm oval profile, particularly warp-resistant due to multiple interior profiling. Base frame, special 75 mm x 50 mm profile, with transport wheels welded to the goal and counterweight pipe. The counterweight pipe is to be filled with quarry sand by the customer. The big wheels make it easy to move the goal.
-
Youth soccer goal Court Royal 5 x 2 m
The newly developed free-standing Youth Soccer Goals Court Royal are made of plain aluminum and are delivered in four parts and comply with its stability with the fully-welded aluminum goals. The goal frames and base frames are of 120 x 100 mm oval profiles. The two side elements are fully-welded and are connected with the cross bar by super stable interior profiles. The torsion-free special profile is fitted with a groove in which the provided plastic net holders can be inserted. For additional charge of 7 % the goals can be delivered with an integrated net holder. According to regulations an ant-tilt-resistant ground anchoring for grassy fields is included. Alternatively an anti-tilt-resistant ground anchoring for hard courts is available as well. The goals comply with the FIFA and DFB standards, are produced according to DIN EN 748 and are safety tested ( GS-tested ). Dimensions: 5 x 2 m.
-
Youth soccer goal Court Royal 3 x 2 m
The newly developed Youth Soccer Goals Court Royal are delivered in four parts. Their stability comply with the fully-welded aluminum-goals.The fully-welded side frames are joined by 102 mm long round profile bars which are fitted with very sturdy interior profiles to join the parts together. Goalposts and bars are made of aluminum. The warp-resistant profile is fitted with a particularly deep groove, in which the plastic net-holders are inserted. According to regulations a tilt-resistant ground anchoring for grassy fields is included. Alternatively anti-tilt weights for synthetic fields are available. The goal meets the FIFA and DFB standards and is produced according to DIN EN 748. Dimensions: 3 x 2 m, Depth at base: 1.25 m.
-
Ground sleeve 700 for beach volleyball posts
Made of hot-dip galvanized steel for installation in sand fields, length 70 cm.
-
Beach volleyball antenna set
One-piece, with DVV (German Volleyball Federation) test symbol. Length 1,80 m, complete with holding flap in yellow made of coated polyester and marking line.
-
Beach volleyball marking lines
9 x 18 m, made of polyester tape 50 mm, with loops at each corner and middle marking. Complies with the GVF (German Volleyball Federation) requirements. Wounded onto a plastic reel. Complete with 4 ground anchors. color: dark blue.
-
Beach volleyball net Competition
Top 3 mm, low-stretch polyester tensioning rope, bottom 4 mm tensioning rope. With 4 tensioning cords as well as 75 mm wide coated edging in neon yellow. Mesh size 100 mm. Dimensions: 9,5 m x 1 m.
-
Beach volleyball net Court Royal 2 mm
Black polyethylene net 2 mm, 9.5 m long, 1 m high, with 50 mm wide coated edging in green. Mesh size 100 mm. Dimensions: 8,5 m x 1 m.
